Migrator

UsageUsage permalink

To use the Sass migrator, tell it which migration you want to run and what Sass files you want to migrate:

sass-migrator <migration> <entrypoint.scss...>

By default, the migrator will only change files that you explicitly pass on the command line. Passing the --migrate-deps option tells the migrator to also change all the stylesheets that are loaded using the @use rule, @forward rule, or @import rule. And if you want to do a test run to see what changes will be made without actually saving them, you can pass --dry-run --verbose (or -nv for short).

$ cat style.scss
$body-bg: #000;
$body-color: #111;

@import "bootstrap";

@include media-breakpoint-up(sm) {
  .navbar {
    display: block;
  }
}
$ sass-migrator --migrate-deps module style.scss
$ cat style.scss
@use "bootstrap" with (
  $body-bg: #000,
  $body-color: #111
);

@include bootstrap.media-breakpoint-up(sm) {
  .navbar {
    display: block;
  }
}

InstallationInstallation permalink

You can install the Sass migrator from most of the same places that you can install Dart Sass:

StandaloneStandalone permalink

You can install the Sass migrator on Windows, Mac, or Linux by downloading the package for your operating system from GitHub and adding it to your PATH.

npmnpm permalink

If you use Node.js, you can also install the Sass migrator using npm by running

npm install -g sass-migrator

ChocolateyChocolatey permalink

If you use the Chocolatey package manager for Windows, you can install the Sass migrator by running

choco install sass-migrator

HomebrewHomebrew permalink

If you use the Homebrew package manager for Mac OS X, you can install Dart Sass by running

brew install sass/sass/migrator

Global OptionsGlobal Options permalink

These options are available for all migrators.

--migrate-deps–migrate-deps permalink

This option (abbreviated -d) tells the migrator to change not just the stylesheets that are explicitly passed on the command line, but also any stylesheets that they depend on using the @use rule, @forward rule, or @import rule.

$ sass-migrator module --verbose style.scss
Migrating style.scss
$ sass-migrator module --verbose --migrate-deps style.scss
Migrating style.scss
Migrating _theme.scss
Migrating _fonts.scss
Migrating _grid.scss

--load-path–load-path permalink

This option (abbreviated -I) tells the migrator a load path where it should look for stylesheets. It can be passed multiple times to provide multiple load paths. Earlier load paths will take precedence over later ones.

Dependencies loaded from load paths are assumed to be third-party libraries, so the migrator will not migrate them even when the --migrate-deps option is passed.

--dry-run–dry-run permalink

This flag (abbreviated -n) tells the migrator not to save any changes to disk. It instead prints the list of files that it would have changed. This is commonly paired with the --verbose option to print the contents of the changes that would have been made as well.

$ sass-migrator module --dry-run --migrate-deps style.scss
Dry run. Logging migrated files instead of overwriting...

style.scss
_theme.scss
_fonts.scss
_grid.scss

--no-unicode–no-unicode permalink

This flag tells the Sass migrator only to emit ASCII characters to the terminal as part of error messages. By default, or if --unicode is passed, the migrator will emit non-ASCII characters for these messages. This flag does not affect the CSS output.

$ sass-migrator --no-unicode module style.scss
line 1, column 9 of style.scss: Error: Could not find Sass file at 'typography'.
  ,
1 | @import "typography";
  |         ^^^^^^^^^^^^
  '
Migration failed!
$ sass-migrator --unicode module style.scss
line 1, column 9 of style.scss: Error: Could not find Sass file at 'typography'.
  ╷
1 │ @import "typography";
  │         ^^^^^^^^^^^^
  ╵
Migration failed!

--verbose–verbose permalink

This flag (abbreviated -v) tells the migrator to print extra information to the console. By default, it just prints the name of files that are changed, but when combined with the --dry-run option it also prints those files’ new contents.

$ sass-migrator module --verbose --dry-run style.scss
Dry run. Logging migrated files instead of overwriting...
<==> style.scss
@use "bootstrap" with (
  $body-bg: #000,
  $body-color: #111
);

@include bootstrap.media-breakpoint-up(sm) {
  .navbar {
    display: block;
  }
}
$ sass-migrator module --verbose style.scss
Migrating style.scss

MigrationsMigrations permalink

DivisionDivision permalink

This migration converts stylesheets that use / as division to use the built-in math.div function instead.

--pessimistic–pessimistic permalink

By default, the migrator converts / operations to math.div even when it isn’t sure that it will be division when evaluated. It only leaves them as-is when it can statically determine that they’re doing something else (such as when there’s no SassScript involved, or when one of the operands is a string). The math.div function currently functions identically to the / operator, so this is safe to do, but may result in new warnings if one of the arguments to math.div at runtime is not a number.

If you want to avoid this behavior, you can pass the --pessimistic flag. With this flag, the migrator will only convert / operations that it knows for sure are doing division. This will prevent any unnecessary math.div conversions, but it’s likely to leave some division unmigrated if it can’t be statically determined.

ModuleModule permalink

This migration converts stylesheets that use the old @import rule to load dependencies so that they use the Sass module system via the @use rule instead. It doesn’t just naïvely change @imports to @uses—it updates stylesheets intelligently so that they keep working the same way they did before, including:

• Adding namespaces to uses of members (variables, mixins, and functions) from other modules.

• Adding new @use rules to stylesheets that were using members without importing them.

• Converting overridden default variables to with clauses.

• Automatically removing - and _ prefixes from members that are used from other files (because otherwise they’d be considered private and could only be used in the module they’re declared).

• Converting nested imports to use the meta.load-css() mixin instead.

$ cat style.scss
$body-bg: #000;
$body-color: #111;

@import "bootstrap";

@include media-breakpoint-up(sm) {
  .navbar {
    display: block;
  }
}
$ sass-migrator --migrate-deps module style.scss
$ cat style.scss
@use "bootstrap" with (
  $body-bg: #000,
  $body-color: #111
);

@include bootstrap.media-breakpoint-up(sm) {
  .navbar {
    display: block;
  }
}

Loading DependenciesLoading Dependencies permalink

The module migrator needs to be able to read all of the stylesheets depended on by the ones it’s migrating, even if the --migrate-deps option is not passed. If the migrator fails to find a dependency, you’ll get an error.

$ ls .
style.scss  node_modules
$ sass-migrator module style.scss
Error: Could not find Sass file at 'dependency'.
  ,
1 | @import "dependency";
  |         ^^^^^^^^^^^^
  '
  style.scss 1:9  root stylesheet
Migration failed!
$ sass-migrator --load-path node_modules module style.scss

If you use a load path when compiling your stylesheets, make sure to pass that to the migrator using the --load-path option.

Unfortunately, the migrator does not support custom importers, but it does have built-in support for resolving URLs starting with ~ by searching in node_modules, similar to what Webpack supports.

--remove-prefix–remove-prefix permalink

This option (abbreviated -p) takes an identifier prefix to remove from the beginning of all variable, mixin, and function names when they’re migrated. Members that don’t start with this prefix will remain unchanged.

The @import rule put all top-level members in one global scope, so when it was the standard way of loading stylesheets, everyone was incentivized to add prefixes to all their member names to avoid accidentally redefining some other stylesheet’s. The module system solves this problem, so it’s useful to automatically strip those old prefixes now that they’re unnecessary.

$ cat style.scss
@import "theme";

@mixin app-inverted {
  color: $app-bg-color;
  background-color: $app-color;
}
$ sass-migrator --migrate-deps module --remove-prefix=app- style.scss
$ cat style.scss
@import "theme";

@mixin inverted {
  color: theme.$bg-color;
  background-color: theme.$color;
}

When you pass this option, the migrator will also generate an import-only stylesheet that forwards all the members with the prefix added back, to preserve backwards-compatibility for users who were importing the library.

This option may be passed multiple times, or with multiple values separated by commas. Each prefix will be removed from any members that have it. If a member matches multiple prefixes, the longest matching prefix will be removed.

--forward–forward permalink

This option tells the migrator which members to forward using the @forward rule. It supports the following settings:

• none (the default) doesn’t forward any members.

• all forwards all members except those that started with - or _ in the original stylesheet, since that was commonly used to mark a package-private member before the module system was introduced.

• prefixed forwards only members that begin with the prefix passed to the --remove-prefix option. This option may only be used in conjunction with the --remove-prefix option.

All files that are passed explicitly on the command line will forward members that are transitively loaded by those files using the @import rule. Files loaded using the --migrate-deps option will not forward any new members. This option is particularly useful when migrating a Sass library, because it ensures that users of that library will still be able to access all the members it defines.

$ cat _index.scss
@import "theme";
@import "typography";
@import "components";
$ sass-migrator --migrate-deps module --forward=all style.scss
$ cat _index.scss
@forward "theme";
@forward "typography";
@forward "components";

NamespaceNamespace permalink

This migration allows you to easily change the namespaces of the @use rules in a stylesheet. This is useful if the namespaces that the module migrator generates to resolve conflicts are non-ideal, or if you don’t want to use the default namespace that Sass determines based on the rule’s URL.

--rename–rename permalink

You can tell the migrator which namespace(s) you want it to change by passing expressions to the --rename option.

These expressions are of the form <old-namespace> to <new-namespace> or url <rule-url> to <new-namespace>. In these expressions, <old-namespace> and <rule-url> are regular expressions which match against the entirety of the existing namespace or the @use rule’s URL, respectively.

For simple use cases, this just looks like --rename 'old to new', which would rename a @use rule with the namespace old to instead be new.

However, you can also do this to accomplish more complicated renames. For instance, say that you previously had a stylesheet that looked like this:

@import 'components/button/lib/mixins';
@import 'components/input/lib/mixins';
@import 'components/table/lib/mixins';
// ...

Since all of these URLs would have the default namespace mixins when migrated to @use rules, the module migrator may end up generating something like this:

@use 'components/button/lib/mixins' as button-lib-mixins;
@use 'components/input/lib/mixins' as input-lib-mixins;
@use 'components/table/lib/mixins' as table-lib-mixins;
// ...

This is valid code since the namespaces don’t conflict, but they’re way more complicated than they need to be. The relevant part of the URL is the component name, so we can use the namespace migrator to extract that part out.

If we run the namespace migrator with --rename 'url components/(\w+)/lib/mixins to \1', we’ll end up with:

@use 'components/button/lib/mixins' as button;
@use 'components/input/lib/mixins' as input;
@use 'components/table/lib/mixins' as table;
// ...

The rename script here says to find all of the @use rules whose URLs look like components/(\w+)/lib/mixins (\w+ in a regular expression means to match any word of one or more characters). The \1 in the output clause means to substitute in the contents of the first set of parentheses in the regular expression (called a group).

If you wish to apply multiple renames, you can pass the --rename option multiple times, or separate them with a semicolon or a line break. Only the first rename that applies to a given rule will be used, so you could pass something like --rename 'a to b; b to a' to swap the namespaces a and b.

--force–force permalink

By default, if two or more @use rules have the same namespace after the migration, the migrator will fail, and no changes will be made.

In this case, you’ll usually want to adjust your --rename script to avoid creating conflicts, but if you’d prefer to force the migration, you can instead pass --force.

With --force, if any conflicts are encountered, the first @use rule will get its preferred namespace, while subsequent @use rules with the same preferred namespace will instead have a numerical suffix added to them.